From sunlight to your kettle
A plug-in kit has no wiring job. Panels hang on a balcony, a microinverter changes the power, and one lead goes into a normal socket.
Try it
Two 475 W panels on a balcony. Change the sun and what is switched on at home and watch where the power goes.
Step by step
- 1
Sunlight hits the panels
Panels facing south, south-east or south-west with little shade make the most. Even bright cloud gives some output.
- 2
The panels make DC power
Each panel produces direct current, a steady flow like a battery gives. It is not usable in a house yet.
- 3
The microinverter converts it
It turns DC into 230 V AC that matches the grid. It caps output at 800 VA for plug-in kits, and switches off if the grid goes down so nothing live is left on the lead.
- 4
A plug into a socket
One lead with a standard 13 A plug goes into a socket. Use a socket you can reach, not an extension lead or a multi-way adaptor. Tell your network operator under G98 within 28 days.
- 5
Your home uses it first
The power joins your house wiring through the consumer unit. Whatever is switched on, like the fridge, router and lights, takes this power before it takes any from the grid.
- 6
Spare power goes to the grid
When the panels make more than the house uses, the extra flows out through the meter. Most plug-in kits do not earn an export payment, so the best saving is to use power while the sun is out.